Раздел: Документация

0 1 2 3 4 5 6 7 ... 19

Outdoor Installation Structural Drawing (Pendant Mounting)

Embedded Mounting (False Ceiling) Step 1 Ceiling Preparation

• Drill a 3/32" (2.4mm) hole at the center of the chosen area.

• Useapencilandacompassestomarka circle 6.7" (170mm) in diameter and cut the circle.

Step 2 The Ceiling Ring

• Attach the ring to ceiling

Step 3 The Fix Ring

• Tighten the three tapping screws into the ceiling or three machine screws with three screw nuts

• Ring size and screw location

• Turn the dome cover anti-clockwise

• Separate the dome cover from camera

• PutonthethreeL shape screw nuts

• Attach fix ring with screw nuts

• Tighten the three black screws into the screw nuts

Step 4 Camera Setting

• Untighten the three • Turn the camera • Separate the camera • Unplug the screws from the base body anti-clockwise body and base connection cable

Setting Fast Dome ID Setting Alarm Mode

SettingCameraFunction(17X&22Xopticallens models only)

Setting Fan Power

Refer to page 8,9 for the setting

Step 5 Attach the Camera Body and Base

• Reconnect the connection cable

Step 6 Connection

• Attach camera body to base

• Turn camera body • Tighten the three clockwise to tight screws to fix the position camera body

• ConnectRS-485

cable

• Connectvideo signal cable

• Connect alarm output cable

0 1 2 3 4 5 6 7 ... 19