Раздел: Документация

0 ... 2 3 4 5 6 7 8 ... 19

Step 7 Install Camera Body and Decoration Ring

• Put camera body and • Turn the camera body • Tighten three

the fix ring into the hole clockwise to tight position black screws

• Put on decoration • Turn the ring clockwise

ring to tight position

Step 8 Install The Dome Cover

• Attach dome cover • Turn the dome cover

to camera body clockwise to tight position

Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance.

Attached Mounting (Fixed Ceiling) Step 1 Fix The Base

• Turn the dome cover anti-clockwise

• Turn the camera cover anti-clockwise

• Attach base to ceiling

Step 2 Camera Setting

• Separate the dome cover from camera

• Separate the camera body to the base

• Tighten the three tapping screws into the ceiling

• Untighten the three screws from base

• Unplug the connection cable

120 f		~~\ 120 \
	- 72nm -

• Base size and screw location

Setting Fast Dome ID Setting Alarm Mode

Setting Camera Function (17X & 22X optical lens models only) Setting Fan Power

Refer to page 8,9 for the setting

Step 3 Attach Camera Body and Base

• Reconnect the connection cable

Step 4 Connection

• Attach camera body to base

• Turn camera body clockwise to tight position

• Connect RS-485 cable

Step 5 Install Decoration Ring

• Connect video signal cable

• Connect alarm output cable

• Put on decoration ring to base • Tighten the three screws Step 6 Install Dome Cover

• Put on dome cover • Turn dome cover clockwise

to camera body to tight position

Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover. Unclean dome cover may affect camera performance.

0 ... 2 3 4 5 6 7 8 ... 19