8(495)909-90-01
8(964)644-46-00
pro@sio.su
Главная
Системы видеонаблюдения
Охранная сигнализация
Пожарная сигнализация
Система пожаротушения
Система контроля удаленного доступа
Оповещение и эвакуация
Контроль периметра
Система домофонии
Парковочные системы
Проектирование слаботочных сетей
Аварийный
контроль
Раздел: Документация

0 ... 8 9 10 11 12 13 14 ... 19

Manual Focus Speeds Switch:

After above steps were completed, the selected manual focus speed is stored in Fast Dome. To use the selected manual focus speed under lens control, user has to push WEj key before operation, otherwise manual focusing speed will be "MEDIUM" as default. To switch back to "MEDIUM" manual focus speed simply push IWfEjPI key again.

Iris Control

The purpose of iris control is to adjust brightness on target. It can be set as Auto Iris or Manual Iris. № Iris Open

Push IRIS O key, to open the iris and brighten the picture. Iris will stop when the key is released. (PIH-801 keyboard LCD displays I=M) № Iris Close

Push IRIS C key, to open the iris and reduce glare.

Iris will stop when the key is released. (PIH-801 keyboard LCD displays I=M) № Auto Iris

Push AUTO IRIS key, to select the Auto Iris mode. (PIH-801 keyboard LCD displays I=A)

4 5 6 MON ZOONM ZOOUOTM 7 8 9 CAM FOFUARCS FNOEUACRS FAOUUTCOS

(DO®

1Ш1И оныеене

ееняие

eeiee1 ее ееееее ееееее ееееее

нее нн«

не не

еешее «ин-«1

PIH-800II

PIH-801

№ 25X Fast Dome Camera Manual Iris Speed Setup

J> Recall Setup Menu

Push C ctrli key to recall OSD menu.

MENUSETUPPAGE1

1.INITIALSET

2. AGC

MEDIUM

3. SENS. UP

4. BLC

5. BLC REGION

CENTER

6. FLICKERLESS

7. WB MODE

8.WBContinue

AUTO

MENUSETUPPAGE2

9. GAMMA

10. PEDESTAL 11.VHAPSL 12.VAPSL 13.HAPGL 14. HAPGH 15.VAPG 16.VHAPG



£ Setup Menu Item Selection

Push joystick down to select 17th item "Iris Speed" on Menu Page 3. 3 On "Iris SPD" push joystick left or right to make selection: FAST -» MEDIUM.

To Exit Setup Menu

О Push acuxmleght key to exit menu, when finish or move joystick to select next item.

Note : "Setup Initialize..." message will be displayed on the monitor for 4~5 seconds, after escape from setup menu. All setting is stored in Fast Dome.

setup initialize......

Manual Iris Speeds Switch:

After above steps were completed, the selected manual iris speed is stored in Fast Dome. To use the selected manual iris speed under lens control, user has to push wEjp0 key before operation, otherwise manual iris speed will be "MEDIUM" as default. To switch back to "MEDIUM" manual iris speed simply push LENSSpEED key again.

Horizontal 180" Instant Flip

Some times it is hard to use the joystick to control the camera tracking the target directly under the camera. The instant flip key can rotate the camera 180 instantly. This allows the camera continue to track the target passing directly under the camera. Two ways to operate 180 instant flip:

О Push 1CTRRE;V key on keyboard to flip the camera 180 horizontally.

Э Push joystick down to bring the camera down to the end, release the joystick and quickly

push joystick down twice to flip the camera 180 horizontally.

l F3 I F4 J I 1 I 2 J 3 J J SETUP

l 4 J 5 J 6 J MON

l 7 J J 8 J 9 J CAM

preset3 J J fast J j CLR 0 j ENT J PRESET

HHHH0EH ИЕЗН ИЕЕ

PIH-800II

PIH-801



Preset Positions Setting

Each dome can have 128 individual preset positions. Each preset stores the exact position of the camera and automatic pan, tilt ,zoom, focus and iris setting. Once the data is set, the preset can be recalled for viewing, or the presets can be set for auto pan.

* Only thefirst 16 presetpositions of fast dome canbeset to auto panmode andfirst6preset positions are corresponding with the 6 alarm inputs.

Э Selecting Fast Dome

Push key CD followed by CAM key, confirming that first camera is selected. Ex. To select 1st fast dome :UllCAM keys To select 64th fast dome :Гб1Г41САМ1 keys

Э Selecting Preset Position

Push key CD followed by CAM key, confirming that first preset position selected. Ex. To select the 1st preset position :IHllPRESETlkeys

To select the 128th preset position :CPC2C81[PRESETkeys

Э Joystick Control

Move the Joystick to bring the camera to the desired view position.

Э Adjusting Lens

ZOOM IN/OUT,FOCUS NEAR/FAR/AUTOand IRISO/C/AUTOkeys.

When set up preset point, using manual focus will provide both clarity and stability of image.

ZEDEED

l F3 J F4 J J 1 J 2 J 3 J J SETUP

l 4 J 5 J 6 J J MON

l 7 J J 8 J J 9 J CAM

ffiESET3 J fast J j CLR 0 ENT J PRESET

ШНЕШ°

I ZOOM I I ZOOM I

IN OUT

I FOUCS I rFOUCS I I AUTO I

I FAR I I NEAR I FOUCS

I IRIS I I IRIS I I AUTO I

I O I I C I I IRIS I

"heeihsee

PIH-800II

PIH-801



0 ... 8 9 10 11 12 13 14 ... 19