Раздел: Документация

0 ... 11 12 13 14 15 16 17 ... 19

Initial Setting (Factory Default)

To reset all functions back to initial factory setting. J) Push CACTrETUP key to recall OSD setup menu.

l2 Move joystick to select 1st item "Initial Set" on menu and move joystick left or right to make selection. Once ON is selected, "Factory Initialize..." message will be displayed on screen for 4-5 seconds.

MENU SETUP PAGE 1

1. INITIAL SET	ON -
2.AGC	MEDIUM
3. SENS. UP
4. BLC
5. BLC REGION	CENTER
6. FLICKERLESS
7. WB MODE
8. WB CONT	AUTO

► System initializing setting

Э When "Initialize" is done, monitor screen will switch back to Setup Menu. Э Push

CAM ESC AUX

LIGHT key to exit menu, when finish or move joystick to select next item.

Auto Gain Control Selection

There are 3 different AGC levels can be selected. (Low = 8dB ; Medium = 22dB ; High = 36dB)

Different AGC levels may make different camera performance under low light environment.

(Factory Default AGC is Medium)

О Push CACTRETUP key to recall OSD setup menu.

Э Move joystick to select 2nd item "AGC" on menu.

Э Move joystick right or left to make selection : High -> Low -> Medium

MENU SETUP PAGE 1

1. INITIAL SET

2. AGC

3. SENS. UP

4. BLC

5. BLC REGION

6. FLICKERLESS

7.WBMODE

8. WB CONT

:OFF

:MEDIUM

:OFF

:OFF

:CENTER

:OFF :ATW : AUTO

MENUSETUPPAGE1

1.INITIALSET
2. AGC	HIGH -
3. SENS. UP
4. BLC
5. BLC REGION	CENTER
6. FLICKERLESS
7.WBMODE
8. WB CONT	AUTO

-> 3 selections HIGH - LOW-

• MEDIUM

a Push mesc

LIGHT key to exit menu, when finish or move joystick to select next item.

Sensitivity Up (Enhancement)

Sensitivity Up function allows user to select different Video Gain (Y Gain) control. (Auto/On/Off)

AUTO : System auto turn on or off Video Gain Control function according to targets brightness.

ON : Video Gain Control Enhancement always on.

OFF : Video Gain Control Enhancement always off.

(Factor Default is AUTO)

О Push CA(CTrETUP key to recall OSD setup menu.

Э Move joystick to select 3rd item "SENS UP" on menu.

I3 Move joystick right or left to make selection : "Auto-> On-> Off".

menusetuppage1

1.initialset

2. agc

3. sens. up

4. blc

5. blc region

6. flickerless 7.wbmode 8.wbcont

:off : medium :off :off : center :off :atw : auto

menusetuppage1

1.initialset
2. agc	medium
3. sens. up
4. blc
5. blc region	center
6. flickerless
7.wbmode
8.wbcont	auto

-> 3 selections ON -OFF-

•AUTO

® Push AUXLIGHT key to exit menu, when finish or move joystick to select next item.

Back Light Compensation

Back Light Compensation can be turned on or off. (Factory Default is OFF) To turnonoroffBLC:

Push Ео-гемП key to recall OSD setup menu. l2 Move joystick to select 4th item "BLC" on menu. S Move joystick right or left to make selection : On -> Off

Note : When "ON" is selected, BLC zone will be showed on monitor screen.

menu setup page 1

1. initial set
2. agc	medium
3. sens. up
4. blc
5. blc region	center
6. flickerless
7.wbmode
8.wbcont	auto

menusetuppage1

1.initialset
2. agc	medium
3. sens. up
4. blc
5. blc region	center
6. flickerless
7.wbmode
8.wbcont	auto

-> BLC Zone 2 Selections ON -OFF

d> Push AJGHt key to exit menu, when finish or move joystick to select next item.

Back Light Compensation Zone Selection

One of five different zone can be selected for BLC. (Factory Default is Center) To select BLC zone :

О Push CACTrETUP key to recall OSD setup menu.

I2 Move joystick to select 5th item "BLC Region" on menu.

Move joystick right or left to make selection : "Top -> Bottom -> Left -> Right -* Center".

MENU SETUP PAGE 1

1. INITIAL SET

2. AGC

3. SENS. UP

4. BLC

5. BLC REGION

6. FLICKERLESS

7.WBMODE

8. WB CONT

:OFF : MEDIUM :OFF :OFF

:CENTER

:OFF :ATW : AUTO

MENUSETUPPAGE1

1.INITIALSET
2. AGC	MEDIUM
3. SENS. UP
4. BLC
5. BLC REGION	RIGHT
6. FLICKERLESS
7.WBMODE
8. WB CONT	AUTO

-> 5 selections

TOP - BOTTOM - LEFT -►RIGHT-* CENTER

Ы Push AUXLHrT key to exit menu, when finish or move joystick to select next item.

Flickerless

Flickerless function can be turned on or off. (Factory Default is OFF) To turnonoroffFlickerless:

О Push ЗсшмП key to recall OSD setup menu.

Э Move joystick to select 6th item "Flickerless" on menu.

Э Move joystick right or left to make selection : On -> Off

Note : When "ON" is selected, Shutter Speed will be fixed at 1/100sec in NTSC or fixed at

1/120sec in PAL.

MENU SETUP PAGE 1

1. INITIAL SET
2. AGC	MEDIUM
3. SENS. UP
4. BLC
5. BLC REGION	CENTER
6. FLICKERLESS
7.WBMODE
8. WB CONT	AUTO

MENUSETUPPAGE1

1.INITIALSET
2. AGC	MEDIUM
3. SENS. UP
4. BLC
5. BLC REGION	CENTER
6. FLICKERLESS
7.WBMODE
8. WB CONT	AUTO

-> 2 selections ON- OFF

® Push хТюИт key to exit menu, when finish or move joystick to select next item.

0 ... 11 12 13 14 15 16 17 ... 19