Раздел: Документация

0 ... 7 8 9 10 11 12 13 ... 15

Chapter 6-5-4. FACTORY RESET

User may want to restore manufacturing default settings. A confirm message shows up for final verification. To perform this task, please select Factory Reset at System->Factory Reset and press Enter.

Chapter 6-5-5. VIDEO SYSTEM

PDR-3160 supports both NTSC and PAL video systems. PDR-3160 allows switching from one video system to another without rebooting. To change video system, press Left or Right button at System->Video System.

Chapter 6-5-6. BUZZER ENABLE

In case, the warning buzzer requires to be turned off. A user can disable the buzzer under System->Buzzer Enable menu item.

Chapter 6-5-7. PASSWORD

PDR-3160 has one set of password protection preventing unauthorized access. To activate password function, please turn Enable Password on or off at System->Password

The password consists of four characters. The default password setting is "1111". The acceptable characters are 1 to 10 (0). To change the password setting, please press Enter at System->Password->Change Password. Please follow the sequence to change password.

1. Enter current password

PASSWORD

+JSET ++SELECT t + MOUE ESC EXIT

2. Enter new password

PASSWORD

+JSET «"»SELECT +MOUE ESC EXIT

3. Enter confirmed password

PASSWORD

+JSET *"*SELECT +MOUE ESC EXIT

Chapter 6-5-8. FIRMWARE UPDATE

Firmware update allows one to upgrade PDR-3160s firmware improving system performance.

To perform firmware update, press Enter on Setup->System->Firmware Update.

Plug in portable USB device at PDR-3160s USB port. Press Enter button on Update Start.

After finishing transferring, remove the USB device and reboot PDR-3160

PREPARE FIRMWARE

To prepare firmware update, please create a directory, firmware, at the portable USB disk. The portable USB disk should contain file system FAT-16 or FAT-32. Please visit the web site at www.meritlilin.com to download the latest firmware, and save the file in the directory mentioned above.

0 ... 7 8 9 10 11 12 13 ... 15